It has inadvertently entered early autumn, and winter is coming. In view of the large area of outdoor swimming pool, the year of entering the "season" is mainly due to the cold winter, and outdoor swimming is a kind of exercise. Swimming, and outdoor swimming pool must be closed. How can we use good swimming pool water treatment equipment in the maintenance and management methods in cold winter, Prepare for the busy next year! Next, I would like to talk about the maintenance and management plan of outdoor swimming pool in winter. I hope it will be helpful to the operators of outdoor swimming pools!

The maintenance and management plan of outdoor swimming pool water purification equipment in winter includes the following categories:

1. When the water in the water purification equipment and pipeline of the outdoor swimming pool is frozen, the water volume will expand greatly during the locking and locking process, which will lead to the expansion and rupture of the pipeline, and even more serious cases will lead to many property losses. When the water purification equipment is installed in the room and the system software is running, the indoor temperature of the main engine room should not be lower than 0 ℃, and the machine equipment and pipes installed outdoors must have anti cooling measures. When the temperature drops below zero, the operation of system software shall be terminated.

2. If it is outdoor swimming pool equipment and pipes, insulation and insulation problems must be solved, such as using straw rope and plastic film bags around the tree trunk for insulation and insulation, and wrapping the joints with tape.

3. The waste water in the swimming pool equipment should be drained, and there should be a level of energy consumption to prevent the water in the refrigerator or gate from freezing. When the mechanical equipment is not dry, the centrifugal pump should be disassembled and then put into storage. However, the cooling tower water circulation system and refrigeration equipment should be heated slowly after being put into use, and there should be a pressure reduction area to avoid excessive pressure.

4. It is necessary to ensure that cold proof and damp proof mechanical equipment is listed, recorded and inspected. List the mechanical equipment to be implemented, record the implementation level by level above the machine head, and check the implementation of the power switch. For the address that is very easy to cause freezing disaster, the common problems of cold proof and operation standards shall be marked.

5. The circulating water system shall be kept unobstructed, the main valve not using the system software shall be closed, and the water storage design scheme at the bottom shall be considered. Antifreeze water can be purchased and used to protect the environment, save energy and reduce consumption.

6. The outdoor swimming pool in the northeast should be drained in winter. The regulating pool should be cleaned and the drain should be blocked to prevent external water from being injected into the swimming pool. It is conducive to promoting the maintenance of diaphragm casing.

7. In winter in frozen areas, if the outdoor garden water wants to operate normally, it should choose: keep the temperature stable above zero, and must absorb energy. When the average temperature is low, more energy is consumed, and appropriate automobile antifreeze can be added to the water, but it should be understood that automobile antifreeze has little corrosion on metal materials and mechanical equipment.

8. If the water pipe or mechanical equipment has been locked, the gate valve should be closed immediately, wrapped with cotton towel, and then poured in slowly with warm water. Do not bake it with fire or clean it with boiling water immediately. The situation of division. You can also use a hair dryer to bake by yourself, or you can pick up a solid object and slowly tap the tap until the ice melts and the drinking level is stable. If the automatic frequency conversion and constant pressure water supply equipment has been locked, it can only be wrapped with hot cotton cloth and sprayed with warm water until the ice in the pipe melts and the water is discharged smoothly.